THE ONE STOP SHOP FOR ALL YOUR LOUDSPEAKER NEEDS
Please note that we are open as usual for online orders, enquiries and repairs
Please also be aware that due to increased customs procedures and ongoing COVID protocols, our delivery times for some items may be longer than normal. This does not affect all items, but please contact us before ordering if you require your order urgently.
Let us bring your loudspeakers
back to life by giving them a full
"MOT" using our repair and
upgrade services. Price from -
£75.00 per pair including VAT
Why not replace your crumbling foam
fronts with tailor-made cloth covered
wooden grille frames
Let us help you design unique
bespoke cabinets for
your loudspeakers.
Our cabinet-maker can produce
individually designed cabinets to a
high quality furniture finish.
20% Cancellation fee on
made-to-order products.
If you decide to cancel your
made-to-order speaker for any reason,
it is unlikely that we could sell it to
another customer at full selling price.
We will therefore charge a
cancellation fee of 20%
of the order price.
A demonstration room is available
at our premises for you to listen
to a selection of our loudspeakers.
You are welcome to bring your own
source equipment in order to replicate
your usual listening conditions
All major credit and debit cards
processed through secure SagePay
Opening times:
Monday to Thursday
8.30am - 4.30pm
Friday
8.30am - 1.00pm
Closed for lunch Monday - Thursday
1.00pm - 1.30pm
Paper Cone Full Range
Recommended as a replacement unit for older Lowther units
The newly designed FE206NV has an adapted ES cone and central whizzer cone.
The new diaphragm material uses a fine, supple, high density fibre which successfully improves the mid-high reproduction.
A 145mm diameter strong ferrite magnet is used
Ideal for use in both reflex designs and back loaded horn enclosures.
Technical Data:
Frame size: 208 x 208mm
Sensitivity (2.83v/1m): 96dB
Nominal impedance: 8 ohm
Frequency range: 44.7Hz-18kHz
Free air resonance: 44.7Hz
DC resistance (Re): 7.2 ohm
Voice coil inductance (Le): 0.1mH
Moving Mass (Md): 15.2g
Force factor (BL): 10.7 Telsa/m
Qts: 0.26
Qms: 7.25
Qes: 0.27
Vas: 50.2L
Max power handling: 90w
Physical Sizes:
Frame size: 208 x 208mm
Overall depth (front of frame to rear of magnet): 88mm
Flange thickness: 3.5mm
Fixing holes: 4 x 5mm diameter on 220mm PCD
Cutout diameter: 184mm
Price per single unit excluding VAT
You may also like...